RegVault

UN R91 Base text (01 series) · UNECE Regulation No. 91 (ECE R91) — Uniform provisions concerning the approval of side-marker lamps for motor vehicles and their trailers.

UN R91 — 01 series of amendments

Changes from 00 series of amendments (supplement 17)

Adopted at the WP.29 177th sessionEntry into force 2019-10-15
What changed
  • Contracting Parties applying this Regulation must cease to grant approvals to this Regulation. This applies as from 24 months after the official date of entry into force of UN Regulation No. [LSD].
  • Contracting Parties applying this Regulation must continue to grant approvals for devices on basis of this and any previous series of amendments. This applies provided that the devices are intended as replacements for fitting to vehicles in use.
  • Old paragraphs 15.1. to 15.8. and 15.10. to 15.13. are deleted. Among them, old paragraph 15.5. said that type approvals granted earlier than 12 months after the date of entry into force remain valid indefinitely.
Why
  • The proposal is part of a package related to the introduction of the new simplified Regulations (LSD, RID and RRD).
  • Because of these new Regulations, it is necessary to freeze the existing Regulations after a reasonable period.

Q1What changed17 changes

End of approvals to this Regulation (para. 15.1.)

Under paragraph 15.1., Contracting Parties applying this Regulation must cease to grant approvals to this Regulation. This applies as from 24 months after the official date of entry into force of UN Regulation No. [LSD]. A new footnote refers to the new UN Regulation on Light-Signalling Devices (LSD) (ECE/TRANS/WP.29/2018/157).

As from 24 months after the official date of entry into force of UN Regulation No. [LSD], Contracting Parties applying this Regulation shall cease to grant approvals to this Regulation.
The new UN Regulation on Light-Signalling Devices (LSD) (ECE/TRANS/WP.29/2018/157).

Extensions and devices for replacement (paras. 15.2. to 15.4.)

Contracting Parties applying this Regulation must not refuse to grant extensions of approval to this and any previous series of amendments of this Regulation. Under paragraph 15.3., Contracting Parties must continue to grant approvals for devices on basis of this and any previous series of amendments. This applies provided that the devices are intended as replacements for fitting to vehicles in use. Before, this text referred to approvals for side-marker lamps on the basis of any previous supplement to the Regulation. Under paragraph 15.4., fitting or use on a vehicle in use of a device approved to any previous series must continue to be allowed. This applies provided that the device is intended for replacement.

Contracting Parties applying this Regulation shall not refuse to grant extensions of approval to this and any previous series of amendments of this Regulation.
Contracting Parties applying this Regulation shall continue to issue grant approvals for side-marker lamps devices on the basis of this and any previous supplement series of amendments to the this Regulation, provided that these side-marker lamps the devices are intended as replacements for fitting to vehicles in use.
1 more change in this group — open in Compare

Earlier paragraphs deleted (old paras. 15.1. to 15.8. and 15.10. to 15.13.)

This series deletes old paragraphs 15.1. to 15.8. and 15.10. to 15.13. Old paragraph 15.5. said that type approvals granted earlier than 12 months after the date of entry into force remain valid indefinitely. The new paragraphs 15.1. to 15.4. do not repeat this text. Old paragraph 15.3. covered extensions of approval to this Regulation in its original form and the subsequent supplements. Some old provisions used periods of 12, 36, 48 or 60 months after the date of entry into force of Supplement 3.

As from the official date of entry into force of Supplement 3 to the original version of the Regulation, no Contracting Party applying this Regulation shall refuse to grant type approval under this Regulation as amended by Supplement 3 of the original version of the Regulation.
As from 24 months after the date of entry into force of Supplement 3 to the original version of the Regulation, Contracting Parties applying this Regulation shall grant type approvals only if the type of side-marker lamp to be approved meets the requirements of this Regulation as amended by Supplement 3 of the original version of the Regulation.
10 more changes in this group — open in Compare
See every change side by side in Compare

Q2Why it changed

Proposed by
Informal Working Group on Simplification of Lighting and Light-Signalling Regulations (IWG SLR)
Working party
GRE, 79th session (April 2018)

Reasons

  • The proposal is part of a package related to the introduction of the new simplified Regulations (LSD, RID and RRD). Because of these new Regulations, it is necessary to freeze the existing Regulations after a reasonable period.

    Sources (2)
    “This proposal is part of a package related to the introduction of the new Simplified Regulations (LSD, RID and RRD).”
    “Due to the introduction of the new simplified Regulations, it is necessary to freeze the existing Regulations after a reasonable period.”
  • The transitional provisions that were adopted to freeze Regulation No. 20 were used as a model.

    Source
    “The transitional provisions that were adoped to freeze Regulation No. 20 have been used as a model.”
  • A twenty-four month transitional period was proposed for all existing Regulations. This period would give the Contracting Parties, their competent authorities and the industry enough time for three tasks. One task is to finish or reorganize the current developments based on the existing text. The other tasks are to eliminate possible misunderstandings and errors in the new Regulation text, and to introduce modified markings according to the new Regulations.

    Sources (4)
    “A twenty-four month transitional period is proposed for all existing Regulations, which would give the Contracting Parties, their competent authorities and the industry enough time to:”
    “Finish or reorganize the current developments based on the existing text.”
    “Eliminate possible misunderstandings and errors in the new Regulation text.”
    “Introduce modified markings according to the new Regulations”

Document trail

  1. 2018-02ProposalECE/TRANS/WP.29/GRE/2018/11Collective proposal by IWG SLR
  2. —Working party adoptsECE/TRANS/WP.29/GRE/79GRE session report, para. 11 (provisional adoption)
  3. —Amended in sessionWP29-176-05Final transitional provisions, transmitted by GRE to WP.29
  4. 2018-12Sent to WP.29ECE/TRANS/WP.29/2018/113/Rev.1Text that GRE sent to WP.29 and AC.1 for March 2019
  5. 2019-03WP.29 adoptsECE/TRANS/WP.29/1145Adopted at the 177th session (session report, para. 146)
  6. 2019-10-15In forceC.N.551.2019.TREATIES-XI.B.16.91UN depositary notification

Q3Who is affected

Vehicle manufacturer

  • Ask your suppliers how they plan for the end of approvals to this Regulation under paragraph 15.1.

Component supplier

  • Plan for paragraph 15.1.: approvals to this Regulation stop being granted 24 months after [LSD] officially enters into force.

Technical service / Approval authority

  • No direct action for this role.

See every change side by side

RegVault customers compare every version of UN regulations, read the consolidated text and download the PDF.

ⓘ This report gives advice only. It is not legal or type-approval advice.

All UN R91 change reports