UN R150 change reports — Retro-Reflective Devices (RRD)
UN Regulation No. 150 (ECE R150) — Uniform provisions concerning the approval of retro-reflective devices and markings for power-driven vehicles and their trailers.
01 series
- 01 series — Supplement 2
In Table 6, the Class SMV minimum values are now in the columns for the entrance angles 5°, 20°, 30° and 40°.
- 01 series — Supplement 1
The Introduction has a new paragraph at its end about approval markings and the use of the 'Unique Identifier'.
- 01 series — Base text
New definitions use the coefficient of luminous intensity RI and the specific coefficient of retro-reflection RA; RI is often referred to as CIL.
00 series
- 00 series — Supplement 6
In Annex 5, the figure “Example of a slow-moving vehicle plate” now shows “r = 5 – 18 mm” instead of “r = 15 – 18 mm”.
- 00 series — Supplement 5
The 'Unique Identifier' can be used only if this Regulation defines the corresponding Summary Document and the database gives access to it.
- 00 series — Supplement 4
Paragraph 5.5.2.1. now says that, in the case of stripes, at least a length of 3 meters must be provided.
- 00 series — Supplement 3
New paragraphs 3.3.4.7. to 3.3.4.10. set rules for the approval and approval marks of grouped, combined or reciprocally incorporated lamps.