UN R150 Supplement 6 (00 series) · UNECE Regulation No. 150 (ECE R150) — Uniform provisions concerning the approval of retro-reflective devices and markings for power-driven vehicles and their trailers.
UN R150 — Supplement 6 to the 00 series of amendments
Supplement 5 → 6
- What changed
- In Annex 5, the figure “Example of a slow-moving vehicle plate” now shows “r = 5 – 18 mm” instead of “r = 15 – 18 mm”.
- The figure “Example of a slow-moving vehicle plate” now has the number A5-VII instead of A5-VI. Paragraph 7.3. of Annex 5 now refers to the example of Figure A5-VII.
- Why
- By mistake, the 00 series of amendments had two figures with the number A5-VI.
- During the simplification process, the value “r = 5 – 18 mm” inadvertently became “r = 15 – 18 mm”.
Q1What changed3 changes
Value “r” in the example of a slow-moving vehicle plate (Annex 5, Figure A5-VII)
The figure “Example of a slow-moving vehicle plate” now shows “r = 5 – 18 mm”. Before this supplement, the figure showed “r = 15 – 18 mm”.
Figure number A5-VII and the reference in Annex 5, para. 7.3.
The figure “Example of a slow-moving vehicle plate” now has the number A5-VII. Before this supplement, it had the number A5-VI. Paragraph 7.3. of Annex 5 now refers to the example of Figure A5-VII instead of Figure A5-VI. The dimension values in this paragraph do not change.
Q2Why it changed
- Proposed by
- Informal Working Group on Simplification of Lighting and Light-Signalling Regulations (IWG SLR)
- Working party
- GRE, 89th session (October 2023)
Reasons
By mistake, the text of the 00 series of amendments had two figures with the number A5-VI. The figure entitled “Example of a slow-moving vehicle plate” has been renumbered as Figure A5-VII. The wrong figure reference number in paragraph 7.3. of Annex 5 is corrected.
Sources (3)
“By mistake there are two “Figures A5-VI” in the text of the 00 series pf amendments to UN Regulation No. 150.”
“The one entitled “Example of a slow-moving vehicle plate” has been renumbered as Figure A5-VII.”
“1. A wrong figure reference number is corrected.”
During the simplification process, the value “r = 5 – 18 mm” inadvertently became “r = 15 – 18 mm”. The value “r = 5 – 18 mm” is the value in the 02 series of amendments to UN Regulation No. 69, Annex 12. The proposal corrects this error.
Source
“3. During the simplification process, the value “r = 5 – 18 mm” (as in the 02 series of amendments to UN Regulation No. 69, Annex 12), inadvertently became “r = 15 – 18 mm”. The proposal corrects this error.”
Document trail
- 2023-08ProposalECE/TRANS/WP.29/GRE/2023/16IWG SLR proposal to clarify and correct the 00 and 01 series of amendments
- —Working party adoptsECE/TRANS/WP.29/GRE/89GRE session report, para. 9
- 2023-12Sent to WP.29ECE/TRANS/WP.29/2024/26Text that GRE sent to WP.29 and AC.1
- 2024-03WP.29 adoptsECE/TRANS/WP.29/1177Adopted at the 192nd session (session report, para. 140)
- 2024-09-22In forceC.N.420.2024.TREATIES-XI.B.16.150UN depositary notification
Q3Who is affected
Vehicle manufacturer
- Check that your drawings of slow-moving vehicle plates agree with the value “r” in Figure A5-VII of Annex 5.
Component supplier
- No direct action for this role.
Technical service / Approval authority
- Check that your test documents for slow-moving vehicle plates use the value “r” in Figure A5-VII of Annex 5.
See every change side by side
RegVault customers compare every version of UN regulations, read the consolidated text and download the PDF.
ⓘ This report gives advice only. It is not legal or type-approval advice.