UN R24 Supplement 10 (03 series) · UNECE Regulation No. 24 (ECE R24) — Uniform provisions concerning: I. The approval of compression ignition (C.I.) engines with regard to the emission of visible pollutants II. The approval of motor vehicles with regard to the installation of C.I. engines of an approved type III. The approval of motor vehicles equipped with C.I. engines with regard to the emission of visible pollutants by the engine IV. The measurement of power of C.I. engine.
UN R24 — Supplement 10 to the 03 series of amendments
Supplement 9 → 10
- What changed
- Annex 1 has a new paragraph 0.5. for the name(s) and address(es) of the assembly plant(s).
- Why
- The experts from France say that, for conformity of production, the information of the assembly plant is needed under the scope of each Regulation.
Q1What changed1 change
Assembly plant(s) in Annex 1 (para. 0.5.)
New paragraph 0.5. of Annex 1 asks for the name(s) and address(es) of the assembly plant(s). Annex 1 gives the essential characteristics of the vehicle and the C.I. engine and information about the conduct of tests.
Q2Why it changed
- Proposed by
- Experts from France
- Working party
- GRPE, 87th session (January 2023)
Reasons
Reasons given by the proposer: Experts from France, in informal document GRPE-87-07-Rev.1. GRPE adopted GRPE-87-07-Rev.1 as reflected in Annex VIII of its report and sent it to WP.29 and AC.1 (ECE/TRANS/WP.29/GRPE/87, para. 20).
For conformity of production purposes, the information of the assembly plant is needed under the scope of each Regulation. This information is then included in the information document.
Sources (2)
“For conformity of production exercise purposes, it is needed to have the information of the assembly plant under the scope of each Regulation.”
“This information is then included in the information document.”
Document trail
- —ProposalGRPE-87-07-Rev.1Proposal by the experts from France
- —Working party adoptsECE/TRANS/WP.29/GRPE/87GRPE session report, para. 20
- 2023-04Sent to WP.29ECE/TRANS/WP.29/2023/58Text that GRPE adopted and sent to WP.29 and AC.1
- 2023-06WP.29 adoptsECE/TRANS/WP.29/1173Adopted at the 190th session (session report, para. 165)
- 2024-01-05In forceC.N.6.2024.TREATIES-XI.B.16.24UN depositary notification
Q3Who is affected
Vehicle manufacturer
- Update your Annex 1 documents to include new item 0.5., “Name(s) and address(es) of assembly plant(s)”.
Component supplier
- No direct action for this role.
Technical service / Approval authority
- Check that the Annex 1 documents give the name(s) and address(es) of the assembly plant(s) in item 0.5.
See every change side by side
RegVault customers compare every version of UN regulations, read the consolidated text and download the PDF.
ⓘ This report gives advice only. It is not legal or type-approval advice.