UN R10 change reports — Electromagnetic compatibility
UN Regulation No. 10 (ECE R10) — Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility.
07 series
- 07 series — Supplement 3
Supplement 3 now takes into account vehicles of categories X and Y and conventional vehicles with an Automated Driving System (ADS).
- 07 series — Supplement 2
The starting profile of ISO 16750-2 now replaces test pulse 4 of ISO 7637-2:2004 in ESA immunity tests.
- 07 series — Supplement 1
In Table 2 of Annexes 4, 5, 7 and 8, the scanning receiver “Step size” of 50 kHz is now a “Maximum step size” of 60 kHz.
- 07 series — Base text
Radiated immunity tests of vehicles to Annex 6 and of ESAs to Annex 9 now cover 20 to 6,000 MHz, not 20 to 2,000 MHz.
06 series
- 06 series — Supplement 4
An approval number must now be assigned to each vehicle or ESA type-approved in accordance with Schedule 4 of the Agreement (E/ECE/TRANS/505/Rev.3).
- 06 series — Supplement 3
Model A in Annex 1 now reads 'a = 6 mm min' and gives approval No. 06 2439 instead of 05 2439.
- 06 series — Supplement 2
Figure 1 of Annex 4, Appendix 1 now also shows the alternative 3 m antenna distance: 3,00 m ± 0,05 m for 3 m measurements.
- 06 series — Supplement 1
For vehicles of categories L6, L7, M, N, O, T, R and S, the statement on RF-transmitters must now be noted in the information document.
- 06 series — Base text
For Annex 5 measurements at 10.0 ± 0.2 m, vehicle limits are now 28 dB microvolts/m (30–230 MHz) and 35 dB microvolts/m (230–1,000 MHz).