UN R86 change reports — Installation of lighting and light-signalling devices for agricultural vehicles
UN Regulation No. 86 (ECE R86) — Uniform provisions concerning the approval of agricultural or forestry vehicles with regard to the installation of lighting and light-signalling devices.
03 series
- 03 series — Supplement 1
The number of front and rear position lamps and front and rear retro-reflectors is now two, four or six.
- 03 series — Base text
Main-beam and dipped-beam headlamps must now be type-approved to listed classes of UN Regulation No. 149, not to Nos. 98, 112 or 113.
02 series
- 02 series — Supplement 2
The number of front and rear position lamps and front and rear retro-reflectors is now two, four or six.
- 02 series — Supplement 1
Paragraphs 6.1.2. and 6.2.2. now list the type approvals for main-beam and dipped-beam headlamps, with classes of UN Regulation No. 149.
- 02 series — Base text
Side retro-reflectors are now mandatory on all vehicles the length of which exceeds 4,6 m (paragraph 6.15.1.).
01 series
- 01 series — Supplement 4
Paragraphs 6.1.2. and 6.2.2. now list the type approvals for main-beam and dipped-beam headlamps, with classes of UN Regulation No. 149.
- 01 series — Supplement 3
References to “[LSD]”, “[RID]” and “[RRD]” now name UN Regulations Nos. 148, 149 and 150.
- 01 series — Supplement 2
New paragraph 5.21. allows lamps approved for and equipped with LED substitute light source(s) exclusively if the paragraph 3.2.6. statement is present and positive.
- 01 series — Supplement 1
Paragraph 2. now says that the definitions of UN Regulation No. 48 apply, unless otherwise specified in this Regulation. Many definitions are deleted from this Regulation, for example “Transverse plane” and “Device”.
00 series
- 00 series — Supplement 7
Many paragraphs now also name the new UN Regulations [LSD], [RID] or [RRD], for example “Front fog lamps (UN Regulation No. 19 or [RID])” in paragraph 6.3.