RegVault
All change reports

UN R67 change reports — LPG vehicles

UN Regulation No. 67 (ECE R67) — Uniform provisions concerning the approval of: I. Specific equipment of vehicles of category M and N using liquefied petroleum gases in their propulsion system II. Vehicles of category M and N fitted with specific equipment for the use of liquefied petroleum gases in their propulsion system with regard to the installation of such equipment.

04 series

  • 04 series — Supplement 3

    New paragraphs 0. to 0.1.3. add an Introduction on vehicles of categories X and Y and conventional vehicles with an ADS.

  • 04 series — Supplement 2

    Paragraphs 6.17.2.1. and 6.17.2.2. now refer to IEC Standard 60529-1989+A1:1999+A2:2013 and add the words “at least the minimum”.

  • 04 series — Supplement 1

    In Annex 3 to Annex 13, references to paragraph 6.15. and its subparagraphs now refer to paragraph 6.17. and its subparagraphs.

  • 04 series — Base text

    Vehicles of categories M2/N2 and M3/N3 must now be labelled as specified in Annex 17 (para. 17.1.8.1.).

03 series

  • 03 series — Supplement 3

    Paragraphs 6.17.2.1. and 6.17.2.2. now refer to IEC Standard 60529-1989+A1:1999+A2:2013 and add the words “at least the minimum”.

  • 03 series — Supplement 2

    References to paragraph 6.15. and its subparagraphs in Annexes 3 to 13 now give paragraph 6.17. and its subparagraphs.

  • 03 series — Supplement 1

    Paragraph 6.17.10.6. and the title of Annex 9, Figure 3 now say “K15 filling unit” instead of “light vehicle Euro filling unit”.

  • 03 series — Base text

    New paragraph 6.17.10.8.: for M1 vehicles, the filling unit must not be below the vehicle body and must respect the height provisions of paragraph 17.4.5.

02 series

  • 02 series — Supplement 3

    New paragraph 11.7. covers type-approvals of components to the 01 series that the changes of the 02 series do not affect.

  • 02 series — Supplement 2

    New paragraph 18. of Annex 16 adds a test for “All components connecting the pressure relief valve and/or the pressure relief device with the gaseous phase in the LPG container”.

  • 02 series — Supplement 1

    The Annex 2B communication form has new items “Type:” (item 1.1.) and “Class / WP (WP only for Class 0 components):” (item 1.2.).

  • 02 series — Base text

    New paragraph 17.1.6.1. requires that an external inspection of the LPG-container and its accessories, when located outside the vehicle, is possible. It must be possible without the use of tools to dismantle, but with visual aids, according to the specifications of the manufacturer.

01 series

  • 01 series — Supplement 16

    The Annex 2B communication form has new items “Type:” (item 1.1.) and “Class / WP (WP only for Class 0 components):” (item 1.2.).